Windows 10 black screen with cursor after login command prompt fix free download.How to fix windows 10 black screen with cursor after login 2020
This issue mostly Cause Because of the Display Driver, may the current Display Driver is not compatible with new Windows 10 or the Driver is get corrupted. And reinstall the display driver probably help to fix Windows 10 black screen problem. In Windows 10 delayed boot-up issue is characterized by a black screen with a mouse cursor during the boot process. Most users Report the System experiences a black screen after upgrading to Windows 10 or install upgrade Display Driver.
After understand windows 10 black screen with cursor after login command prompt fix free download issue and Reason /15816.txt the problem, Here apply bellow solutions to fix Black Screen with the cursor, Black screen of Death Startup problem on Windows Bellow solutions are applicable to both causes Black screen Curwor login or At startup.
This Start the Нажмите для продолжения Windows Explorer and you get back the normal screen. Attach the Battery again And Try to start the windows again. Where you will get the Startup repair option which helps to scan and fix startup problems which cause, Prevent windows to Start normally. If after performing above steps Get back the normal Screen? Then try steps below to avoid the back screen problem on next Boot.
Which Start windows with minimal system resources so that you can downnload troubleshooting steps normally. As discussed Before the problem mostly occur due to the Display Driver issue. If the problem started After Recent windows upgrade, Then may the Fiix driver is older, Corrupted windows 10 black screen with cursor after login command prompt fix free download not compatible with the current windows version.
This cause you need to update the Display driver with the latest version. Or the other cause if the problem started after Recent Display Driver upgrade then may the New version driver is not compatible that cause you can use the Roll Back Driver option.
And download the latest available Display Driver and save it. Again open Device manager Expand display driver, you find windows installed basic Display driver If not then click Action select hardware changes. If fre problem started after the Recent Display Graphics driver update, Then may the new version display driver is not compatible with your current windows version. That cause Roll Back Driver option is very helpful, Which revert the current driver version to the previously installed version.
Also While upgrade to recent windows 10there are chances some system files missing or get corrupted. You Can create a new user account and check the account load properly without any black по этому адресу stuck etc. Remember To change name and password in the command for the name of the account and password you want.
Now Windows 10 black screen with cursor after login command prompt fix free download from safe mode, Restart windows and try to login with new user account check user profile loaded completely without any black screen stuck. If all Above methods fail to fix then, You can tweak windows registry by following steps below to fix Black screen with cursor issue on windows Note: windows registry are an important part of Windows OS, a Wrong modification can cause issue. We recommend to back up registry comand base or create a system restore girls swords fencing workbook. From left pane navigate to following key.
Here highlight Winlogon and Double-click the value Shell showing on the right side to make sure the Value data is explorer. If not change it to explorer.
Check problem solved. Next time windows start normally without any black screen stuck. These are some downlod most working solutions to fix Windows 10 Black Screen with cursor problem. Also Read. Additional menu Home » How to fix windows 10 black screen with cursor after login
Windows 10 black screen with cursor after login command prompt fix free download.Full Fixes for the “Windows 10 Black Screen with Cursor” Issue [MiniTool Tips]
You will learn 11 solutions to Windows 10 black screen with cursor after login. It’s also wise choice to backup files before resetting your PC or after you fix this problem so as to avoid data loss. Hi, I have been trying to login to my computer for two days but every time I enter my password a black screen with only a cursor appears.
I am unable to access anything on my computer besides task manager. I tried to run explorer. Hope you can help. Sometimes Windows may display a black screen with cursor after login, which is also known as BSOD black screen of death. It’s quite frustrating because no error message or code will be provided.
But don’t worry too much, we’ve complied some possible causes in the following article. Generally speaking, BSOD may be caused by outdate or incompatible driver, corrupted system files, corrupted user profile, hardware conflicts, virus attack, etc. Thus, the solutions will be given based on different causes.
You can try following fixes one by one to fix BSOD. But please note, except for the basic troubleshooting, other solutions require you to enter safe mode or recovery environment at first.
To fix the black screen with blinking cursor error, you need to try some basic troubleshoting in order to avoid further problems, such as, computer fails to boot. Then, let’s get started. The hardware conflicts can be the one of the most common reasons for black screen. To check it, you need to remove all the external devices. Step 2. Remove USB, external hard drive, headset and microphone including the charger cable.
If your computer is a laptop, you still need to remove the battery. Step 4. Put back the charger cable and battery , restart your computer and see if the problem is solved. Note: If you installed the external graphic card, you need to remove it before restarting computer.
Step 1. Step 3. In the Create new task window, type Explorer. Then, click OK. Open task manager in the black screen window.
In the Create new task window, type services. In the Services window, find out the AppReadiness service and double-click it. Then, you will see its properties window, scroll down to the Startup type and select Disabled , click Apply and OK. It will turn off your computer. Corrupted user profile can be a cause for this issue.
To fix it, you can create a new user account within command prompt. To do so, you could try the following steps. In the Create new task window, type cmd and tick Create this task with administrator privileges. Go to the old account’s folder and copy files to the new account. Usually, when your computer starts, it will start a bunch of services, drivers, and applications in the background, if they works properly, your computer will start normally.
If one of them is not working, you will receive the black screen with blinking cursor error. In this case, you can choose to perform a clean boot in safe mode, with a minimal set of drivers and startup programs, so as to avoids software conflicts.
The steps are:. Search msconfig in the search box and select System Configuration option. Click the Services tab. Then, in the lower location, tick Hide all Microsoft servcies and click Disable all , click Apply. Click the Startup tab and then the Open Task Manager option. In the Task Manager window, click the Startup tab. Then, select each app and click Disable. If you can start your computer normally after a clean boot, you still need to check the problem was caused by which items.
To make it, follow the steps below. In the lower location, tick Hide all Microsoft services and select one of the services , click Apply and OK. If the selected service is not the casuse of the problem, repeat the steps until you find the problematic item. Recently quality update can be a cause for windows black screen with cursor after login error, because it may rollout bugs and compatibility issues. In order to uninstall it, you can do with the following steps in safe mode. Fast startup is a feature in some installations with specific hardware configuration, and it allows a device to boot faster.
Sometimes it may cause the black screen error, so you need to disable it in safe mode. In order to do so, do as instructed. Open Control Panel. Then, select System and Security and Power options in order. In the Power Options window, select the Choose what the power button do option. Uncheck Turn on fast startup recommended option and click Save changes button. Incompatible drivers can also cause this black screen error, to fix it, you need to uninstall installed graphic drivers in safe mode.
To do so, use the following steps. In the Device Manager window, expand Displayed Adapters. Then, right-click the installed display adapter and choose Uninstall device. Here you will see the Uninstall Device window, be sure the option Delete driver software for this device is checked and click Uninstall again. Once the device restarts, your computer will try to reinstall the graphics driver automatically to solve this error.
If this problem still exists, you can try to roll back the graphic drivers by the following steps. Go to the Device Manager and expand Displayed Adapters. In the Properties window, click the Driver tab.
Then, Scroll down to the Roll Back Driver and select it. In the Driver Package rollback window, select any reason and click Yes. It’s saide to be a working solution. System file error is also a cause for the black screen with blinking cursor error. The steps are below. Type cmd in the search box, select it and run as administrator.
If it does not fix the problem, type DISM. Type recovery in the search box and select it. Step 5. Confirm the restore point and click Finish to restore computer to an earlier date. If you are not able to access the safe mode, you can go to the Windows recovery environment and try to troubleshoot your computer with given recovery tools, such as, Startup Repair, System Restore, System Image Recovery, Command Prompt, Reset this PC.
Reset this pc can be the last resort if you cannot fix the black screen error. It allows you to reset this pc and keep files in Windows 10 , but apps and settings will be removed thoroughly.
Having said that, some users still say they lose their important files during the process. Thus, please take it seriously before use. It’s a wise choice to backup important files or system. You can download it to explore yourself. Here I’ll take file backup as an example to show you the entire process, you could follow the steps below.
As you cannot access your computer, you need to create bootable USB on another working computer and boot from it. Connect the bootable USB, change boot priority of it and boot from it. Click Add File or Add Folder and select files you want to backup. If you want to backup files with a certain file extension , you can click the funnel shape at the right side of the selected folder and set the specific file extention.
Note this feature is available on the professional version, you can upgrade to it if needed. Click the folder shapped button to select the backup destination. If it’s an external hard drive, you need to connect it to the computer having problem. One single backup will only backup data at that point, which will not include the changes made later.
Thus, if necessary, it is suggested to create a schedule backup so as to continously protect data. To make it, click Schedule and select any of backup settings you like. Then, click OK to save the chanages. Access the Windows recovery environment.
Full Fixes for the “Windows 10 Black Screen with Cursor” Issue.Windows Black Screen with Cursor, after update [Fix] – Device Tricks
Jan 03, · After understand the issue and Reason behind the problem, Here apply bellow solutions to fix Black Screen with the cursor, Black screen of Death Startup problem on Windows Note: Some Users Report when they log in to windows but don’t get any display Screen Stuck on Black ted Reading Time: 8 mins. Windows Key + R then type and hit Enter to open Device Manager. Display adapters then right-click on Intel HD Graphics and select Disable. your PC to save changes and see if you’re able to Fix Windows 10 Black Screen with Cursor Issue. Method 7: Activate the built-in Windows Administrator Account. Apr 20, · Whenever you end up with ‘Windows 10 blank screen with cursor after login’ follow below solution. Step 1: on the blank screen with cursor, Click ‘Ctrl+Alt+Del’ it will bring you the option for “Task Manager” along with other options (You can also use the key combination CTRL+SHIFT+ESC to open the Task Manager directly.).